Yaesu
CT62 CAT Interface
These
CT62 Interfaces are used and recommended by the Ham Radio
Deluxe Development team. The choice of those who know.
For whatever CAT / Logging software you use. A CAT interface
allows PC software control of your radio. Programming of
HF radios with CAT capabilities is also accomplished by
using a CAT interface and software suitable for your radio.
Made using surface mount components on a high quality fiber
glass PCB inside the connector cover. These interfaces use
a unique design that makes it one of the most popular, best
performing and versatile interfaces available ! Quality
and performance does not have to be expensive! These interfaces
work at all baud rates and with ALL PC's / laptops with
a comport. Or with USB to serial cables.
If you need a USB CAT interface, then use any of these interfaces
with a USB to serial interface cable. A 2 meter USB
to serial interface cable is also available.

some
eHam
feedback
|
|
The
DigiMaster
USB MultiFace.
USB CAT Interface [and more]. Single and Dual channel versions
are available. With these you have USB CAT and programming
capabilities for Icom AND Yaesu radios.
 |
The
MultiFace can be used with Y4 cable to allow the FT857
/ FT897 to operate CAT via the microphone. Leaves the
8 pin CAT-LINEAR-TUNER socket free for other use. Y4
cable includes an adaptor to plug your microphone back
into circuit. |
A USB to serial cable is also available for use with
the following interfaces.
Prices
shown are for the 2 meter lengths.
Other
lengths are higher priced to cover the extra manufacturing
and shipping costs.
|