DigiMaster RadioSelector
Allows you to connect your DigiMaster Audio-DATA interface (DATA connection) to two radios or between two connections to one radio. Then select either radio using the push button.

For example, use with FT847's separate HF and VHF connections.
A radios main band and sub band.
Or just between any of two of your radios.
You can of course "cascade" several of these units to switch between several radios.

All DigiMaster Audio-DATA interfaces have standard connecting leads and so can be used with this radio selecting switch.
Its designed to match the DigiMaster range of interfaces and can select between either of two radios.
Supplied with a short [0.3m] UN01 cable to connect it to your DigiMaster Audio-DATA interface, your normal radio connecting lead is then inserted into one of the two switched sockets at the rear. Your second radio is then connected into the other radio socket. Switching between radios is then simply a matter of pushing the switch!
Isolation is fully maintained between both radios audio in and out, audio gnd, and the radios PTT and the PC.

Use's the same extruded black anodized aluminum boxes used with our other interfaces.