The DigiMaster PRO - A Concept in DATA mode interfaces and you saw it here first !

Note: Unlike the simpler SB2000 which uses a single channel USB device (FTDI 232), the DigiMaster PRO interface uses a DUAL USB device (FTDI 2232) to give you 2 totally independent virtual comports. One virtual comport is used for PTT / CW / DATA, whilst the second virtual comport is used exclusively for CAT control. When you use the DigiMaster PRO, you can use whatever CAT software you wish to use, AND, at the same time use whatever afsk DATA software you want to use. For example, when using the DigiMaster PRO, you can use HRD for CAT control (or your own favourite CAT software) while at the very same time use EasyPal or MMSTV or MixW (or your own favourite DATA software) for DATA, no problem. You can't do that with the SB2000.

Designed to fits all your needs. You can start with a basic version of the interface and upgrade it at a later stage or simply change the plug in modules as your needs change. The modular design of the DigiMaster PRO allows you to select or change the functionality of your DigiMaster PRO Interface. From straight forward high performance DATA interface to high performance DATA interface with built in USB CAT with support for Icom / Yaesu / Kenwood, support for TTL or RS232, it's probably the only interface you will ever need. And when using the CM1 module you also have support for programming those other VHF/UHF radios in your shack.

 

Hi performance USB DATA / CAT interface.
The right way to do it all. With you decide that you need together in the one interface. Performance second to none, with professional quality isolating transformers in both RX and TX lines. Giving cleaner and clearer RX and TX signals, with no risk of receiving or worse, transmitting any "hum". Low power consumption makes it ideal for laptops as well as desktop PC's. For use with ALL afsk DATA software including, HRD, DM780, MixW, DigiPan, WSJT, etc. Unleash the full power of programs like the Ham Radio Deluxe suite and MixW etc.
Sturdy aluminum case, approx. case size of 80mm wide, 30mm high, 120mm deep. On/off switch and red/green led for RX/TX.
The CW lead, USB and audio leads are supplied as standard.
The CW lead is fitted with a standard 3.5mm jack. If you radio needs a 1/4" CW jack then you will need an adapter.

Not only can you changes leads if you change your radio, but now you can even change / upgrade the functionality of the interface to match your latest radio / requirements. All modules are available separately.

Note: that this interface is available complete for some popular radios,

     
     

 

To make your selections:
Select the modules you require and add them to your "basket".
Obviously, your selections will reflect your needs and also to match the radio.
You can add / delete and change items in your PayPal basket at any time.
You will see a "running total" in your basket and you will also see the shipping costs before you finalise your purchase.
Should you decide not to purchase you can simply empty your basket when you leave.
The modular design of the interface makes it very flexible and because of that the selections can become more complex, if you need assistance simply email us and we will help asap. The steps below may help you.

[1] Select the DigiMaster PRO Interface.
[2] Select the DATA lead to suit your radio.
Note: If your radio supports Digi-Vox, (such as the FT857 and FT897) and you already have a CAT interface then this is all you need.
Many Icom radios will also accept DATA via the acc socket when TX ing via the CAT system (IC746, IC756 pro3).

[3] Select your USB module. - USB1 (single channel does not support CAT, whereas the dual channel USB2 does support CAT).
If you selected the single channel "USB1" module then you are complete.
And you will have 3 items in your basket.

Continue with steps 4 and 5 only If you selected the "USB2" DUAL channel USB module.
[4] Select your optional CM[x] CAT module to suit your radio.
[5] Select the appropriate CAT lead to suit your radio your radio.
You will now have 5 items in your basket.

Step [1] Purchase the Interface

DigiMaster PRO Interface
Download USB driver Download driver file zip Click to see customer feedback Windows 98 Windows 2000 Windows ME Windows XP Vista Windows 7 Linux Mac OSX + Tiger

 

DigiMaster
PRO
Interface


DigiMaster PRO Interface.

DigiMaster PRO interface.

You need the "barebones" interface onto which you simply plug your selection of optional modules to suit your requirements. The barebones interface has the PTT relay, CW opto isolator, and isolating ransformers. Also supplied are all the leads to connect to the PC.
Next step is to select the lead to connect the DigiMaster PRO to your radio.

 

DigiMaster PRO
Interface
UK ONLY
destinations
Shipping to the UK ONLY

£ 37.99
European
destinations
Shipping to the EU and other European destinations

€ 49.99
US + Other
destinations
Shipping to the US and all other destinations

$ 64.99

Step [2] DATA leads here

Step[3] Select your USB module

DigiMaster PRO - SINGLE channel USB module
Download USB driver Download driver file zip Click to see customer feedback Windows 98 Windows 2000 Windows ME Windows XP Windows Vista Linux Mac OSX + Tiger

 

USB1 module


DigiMaster PRO SINGLE channel USB module.

SINGLE channel USB module for the DigiMaster PRO interface.

The single channel USB module is based on FTDI's 232RL chip, which gives you a single comport for control of the interfaces PTT and CW functions. The single channel USB module provides the DigiMaster PRO interface the ability to operate all afsk DATA modes and CW. It does not provide CAT capability. For CAT functionality see the DUAL channel USB module below.

If you select this option your purchase is complete if you have selected 3 items.

 

DigiMaster PRO
SINGLE channel USB module
UK ONLY
destinations
Shipping to the UK ONLY

£ 9.99
European
destinations
Shipping to the EU and other European destinations

€ 14.99
US + Other
destinations
Shipping to the US and all other destinations

$ 17.99


DigiMaster PRO - DUAL channel USB module
Download USB driver Download driver file zip Click to see customer feedback Windows 98 Windows 2000 Windows ME Windows XP Windows Vista Linux Mac OSX + Tiger

 

USB2 module


DigiMaster PRO DUAL channel USB module.

DUAL channel USB module for the DigiMaster PRO interface.

The dual channel USB module is based on FTDI's popular 2232 USB chip which gives the interface 2 comports. The first comport gives you the interfaces PTT and CW lines. The second comport is used exclusively for the CAT interface section (CM[x] module). As the 2 comports are fully independent of each other, this gives you the ability to use whatever DATA mode software you wish to use, whilst at the same time allows you to use whatever CAT software you wish to use, (provided that the CAT software you intend to use will support your radio of course).

 

DigiMaster PRO
DUAL Channel USB module
UK ONLY
destinations
Shipping to the UK ONLY

£ 19.99
European
destinations
Shipping to the EU and other European destinations

€ 27.99
US + Other
destinations
Shipping to the US and all other destinations

$ 37.99

 

Step[4] Select your CAT CM[x] module

DigiMaster PRO - CM1 module

 

CM1 module


DigiMaster PRO CM1 CAT module.

TTL level CAT module to plug into DigiMaster PRO interface.
Suitable for;

All icoms with 3.5mm CI-V / CT17 / remote socket.
Yaesu's that use CAT interface, 6 pin din / 6 pin mini din / 8 pin mini din CAT socket.
This item is the CM1 module only, suitable cables are available below.

The CM1 module is also suitable for radio programming.

Step[5] Select your CAT / programming lead(s).

ALL radio programming cables for the MultiFace will also function correctly with this module.

 

DigiMaster PRO
CM1 module

UK ONLY
destinations

Shipping to the UK ONLY
£ 9.99

European
destinations

Shipping to the EU and other European destinations
€ 13.99

US + Other
destinations

Shipping to the US and all other destinations
$ 15.99


DigiMaster PRO - CM2 module

 

CM2 module


DigiMaster PRO CM2 CAT module.

Suitable for the older Kenwoods that use the 6 pin din plug for CAT [*].
Inc TS450(s), TS850(s).

[*Subject to you having any necessary Kenwood optional extras / upgrades fitted to your radio that may be required in order to enable CAT operation].

This item is the CM2 module only, suitable cables are available below.

Step[5] Select your CAT / programming lead(s).

Suitable cables are available here.

 

DigiMaster PRO
CM2 module

UK ONLY
destinations

Shipping to the UK ONLY
£ 9.99

European
destinations

Shipping to the EU and other European destinations
€ 13.99

US + Other
destinations
Shipping to the US and all other destinations

$ 15.99


DigiMaster PRO - CM3 module

 

CM3 module


DigiMaster PRO CM3 RS232 / serial CAT module.

Suitable for any radio using RS232 serial type CAT.
This item is the CM3 module only, suitable cables are available below.

Step[5] Select your CAT / programming lead(s).

Suitable cables are available here.

 

DigiMaster PRO
CM3 module

UK ONLY
destinations

Shipping to the UK ONLY
£ 12.99

European
destinations

Shipping to the EU and other European destinations
€ 17.99

US + Other
destinations

Shipping to the US and all other destinations
$ 19.99