The DigiMaster PRO
DO IT ALL!
Unleash the FULL power of Ham Radio Deluxe!
and other CAT and DATA software in MixW

Extremely popular, this interface has become our best selling interface by far !

Designed to fits all your needs. You can start with a basic version of the interface and upgrade it at a later stage or simply change the plug in modules as your needs change. The modular design of the DigiMaster PRO allows you to select or change the functionality of your DigiMaster PRO Interface. From straight forward high performance DATA interface to high performance DATA interface with built in USB CAT with support for Icom / Yaesu / Kenwood, support for TTL or RS232, it's probably the only interface you will ever need. And when using the CM1 module you also have support for programming those other VHF/UHF radios in your shack.

Hi performance USB DATA and CAT interface.
The right way to do it all. With everything is included and its all you need together in the one interface. Performance second to none, with professional quality isolating transformers in both RX and TX lines. Giving cleaner and clearer RX and TX signals, with no risk of receiving or worse, transmitting any "hum". Low power consumption makes it ideal for laptops as well as desktop.
For use with ALL afsk DATA software including, HRD, DM780, MixW, DigiPan, WSJT, etc.
Unleash the full power of programs like the Ham Radio Deluxe suite and MixW etc.
Sturdy aluminum case, approx. case size of 80mm wide, 30mm high, 120mm deep.
On/off switch and red/green led for RX/TX.
The dual channel interface based on FTDI's popular 2232 USB chip, gives the interface 2 comports. The first comport gives you control over the interfaces PTT and CW lines. The second comport being used exclusively for the CAT interface section. As the 2 comports are fully independent of each other, this gives you the ability to use whatever DATA mode software you wish to use, whilst at the same time, you to use whatever CAT software you wish to use, (provided that the CAT software you intend to use will support your radio of course).
Leads to PC are approx 1.8m length and leads from interface to radio are approx 0.8m length.
The CAT interface section is a plug in module that is available in 3 versions;
[1] CM1 - TTL CAT.
For all Icom the CIV radios, also the Yaesu radios that use a CAT interface, including many of the older older Yaesu radios uing either 6 pin din, 6 pin mini din, 8 pin mini din.
The CM1 module also supports radio programming and has same spec as the DigiMaster MultiFace and so any of the MultiFace radio programming leads can also be used for programming those VHF/UHF radios.
[2] CM2 - Inverted TTL for the older Kenwoods TS450(s) and TS850(s) etc that use the 6 pin din socket..
[3] CM3 - RS232 for those radios that use a serial cable.
The CW lead, USB and audio leads are supplied as standard.
The CW lead is fitted with a standard 3.5mm jack. If you radio needs a 1/4" CW jack then you will need an adapter.
Connection diagram
If your radio is not in the list you will need to purchase the interface and its data and cat cables separately, or eMail us and we will either add your radio to the list or offer you a quote. (quotes are valid for 14 days).

Includes ALL modules and ALL cables,
Everything you need ready to plug in, set up, and go.