Radio connecting cables - Icom CAT / CI-V cables

Suitable for use with;-
[1] DigiMaster MultiFace
[2] DigiMaster PRO interface using CM1 module.

DigiMaster ICOM CAT / CI-V cables.

ICOM CI-V - CAT Cables
These cables are for use with the DigiMaster USB MultiFace OR with the DigiMaster dual channel USB Audio-DATA interfaces. These cables cannot be used alone.
Overall length is approx 1m.

I1
CAT - CI-V cable suitable for ALL Icoms with CI-V except IC-R20.

I2
CAT - CI-V cable suitable for Icom IC-R20.
Suitable for programming your radio via the CAT system.

 

DigiMaster MultiFace ICOM CI-V - CAT Cables

UK ONLY destinations £ 3.99 Type: I1 I2

European destinations € 6.49 Type: I1 I2

US + Other destinations $ 7.99 Type: I1 I2

Radio connecting cables - Icom ICR20 CAT / CI-V cables

Suitable for use with;-
[1] DigiMaster MultiFace AND the ICR20 ONLY.

DigiMaster ICOM ICR20 CI-V ++ Audio cable.

I3
CAT - CI-V cable with AUDIO suitable for Icom IC-R20.
This cable connects to your ICR20 and to the MultiFace to allow CAT operation. A second cable connects to your PCs sound card input so enabling you to decode all the afsk DATA modes that your software will allow.

NOT ACTUAL IMAGE

 

DigiMaster MultiFace ICOM ICR20 ONLY CI-V - CAT + audio Cable

UK ONLY destinations £ 4.99

European destinations € 7.99

US + Other destinations $ 9.99

Radio connecting cables -YAESU CAT cables

Suitable for use with;-
[1] DigiMaster MultiFace
[2] DigiMaster PRO interface using CM1 module.
[2] DigiMaster DUAL channel DATA interface.

DigiMaster YAESU CAT Cables.

Suitable for use with BOTH the DigiMaster MultiFace and the DigiMaster DUAL channel DATA interface.

These cables are for use with the DigiMaster USB MultiFace OR with the DigiMaster dual channel USB Audio-DATA interfaces. These cables cannot be used alone.
Overall length is approx 1m.

Y1
CAT cable suitable for ALL versions of Yaesu 6 pin din;-
FT736 FT747 FT767 FT980 FT990 [The FT990 requires rom vers 1.3 only]
FT1000 [rom 6.0 or higher] FT 1000-D [The FT1000 requires rom 6.00 or higher].
Heath SB-1400 FRG100 FRG8800 FRG9600.
Y2
ALL versions of Yaesu 6 pin mini din FT757gx2 (not gx!) FT840 FT890 FT900.
Y3
ALL versions of Yaesu 8 pin mini din FT100 FT817 FT857 FT897.

Radio connecting cables -YAESU CAT cables

Suitable for use with;-
[1] DigiMaster MultiFace
[2] DigiMaster PRO interface using CM1 module.

DigiMaster MultiFace YAESU CAT Cables
For ALL versions of the Yaesu FT857 and FT897.
Allows CAT operation via the mic socket, a microphone adaptor allows Yaesu's "standard" microphone to remain in circuit for use at the same time. This leaves the 8 pin CAT/LINEAR/TUNER for other uses. Includes Microphone adaptor.
This cable is for use with the DigiMaster USB MultiFace OR with the DigiMaster dual channel USB Audio-DATA interfaces. This cable cannot be used alone.
Overall length is approx 1m.

Now you can run your CAT and data modes with your mic and tuner etc all in circuit at the same time.

 

DigiMaster MultiFace cable Y4 FT857 / 897 CAT via microphone socket

UK ONLY destinations £ 11.99 Type: Y4

European destinations € 18.99 Type: Y4

US + Other destinations $ 23.99 Type: Y4

Radio connecting cables - PROGRAMMING cables

Suitable for use with;-
[1] DigiMaster MultiFace
[2] DigiMaster PRO interface using CM1 module.

DigiMaster MultiFace Programming cables
Cables for connecting your radio to the DigiMaster USB MultiFace.
These cables cannot be used alone.
Overall length is approx 1m.

P1
3.5mm jack - Icoms IC R2 R3 R5 R10 F3 F4 F10 F11 F12 F21 IC-2100, IC-2200, IC-2720/25 etc. Will work with any radio that requires the opc478. Fully compatible with adms software. IC-208H IC-2100 IC-2200H IC-2720H IC-2725E IC-2800 IC-A3 IC-A4 IC-A5IC-E90 IC-F10 IC-F11 IC-F11S IC-F12N IC-F12SN IC-F20 IC-F21 IC-F21S IC-F22 N/W IC-F22 N/W Low IC-F22S N/W IC-F22S N/W Low IC-F3 IC-F3GS IC-F3GSN 100 ch IC-F3GT IC-F3GTN 100 ch IC-F3S IC-F4 IC-F4GS IC-F4GSN 100 ch IC-F4GSW low band IC-F4GT IC-F4GTN IC-4GTN 100 ch IC-F4GTW IC-F4S IC-F4TR IC-FR3100 IC-FR4100 ham band IC-FR4100 hi band IC-FR4100 low band IC-M21 IC-R10 IC-R2 IC-R3 IC-R5
Also Directly fits the Yaesu VX1/2/5 VX10 and others in the VX range that program via the 3.5mm jack inc VX120/150/170/177 VR500 etc. Note: To fit some of the Yaesu models (VX6 and VX7) you will need the Yaesu CT91 adapter cable or other suitable adapter, and a 3.5 to 2.5mm adaptor or use P3 cable with CT91.. Also programs the VR120 FT10 FT40 FT50 FT60 (and MANY others).
P2
6 pin mini din For the Yaesu FT-3000M FT-7100, FT7800, FT8000R, FT8100, FT8800, FT8500, FT8900R etc.
P3 2.5mm - Yaesu (via CT91 adaptor) and Alinco's that program via the 2.5mm jack.
Many Yaesu radios that have "special" sockets can be programmed via the CT91 adapter and the 2.5mm jack. The CT91 adapter is available from Yaesu dealers. FT60 etc.
To fit the VX7 you need to use this with the Yaesu CT91 adaptor.
P4 RJ12 FT1802, FT2800 etc.

 

DigiMaster MultiFace Programming cables

UK ONLY destinations £ 3.99 Type: P1 P2 P3 P4

European destinations € 7.49 Type: P1 P2 P3 P4

US + Other destinations $ 8.99 Type: P1 P2 P3 P4